![]() The PC will boot to the Chkdsk screen, and when it's done, Windows shall boot up normally. Now, you can shut down the PC to replace the hard drive, then power it on. If there’s still unused disk space left on the SSD after the clone, you can use GParted to grow the partitions to fill the whole space. “status=progress” enables you to monitor the cloning progress. “bs=blocksize” makes “dd” read and write x bytes per block, a large block size value decreases the time to copy. Sudo dd if= of= bs=blocksize status=progressĮg.: sudo dd if=/dev/sda of=/dev/sdb bs=4M status=progress Note down the drive names of the source disk and target disk, double-click the Terminal icon and enter the dd command to perform disk cloning: You can distinguish them by the different sizes. There’s a list of all the hard drives that are currently connected. Click on the drive path in the top-right corner. After finishing the keymap, language, and video mode questions, if you want GParted to clone the disk to a smaller SSD, you can shrink partitions on the old hard drive, making the total size smaller than the SSD. Then, you can see the GParted Live interface. Press the required key to enter BIOS and set the USB as the first boot order. Then unplug all unnecessary drives and install the new SSD to your PC properly. Please delete unwanted files and programs on the old hard drive. Select a target USB to install the image file. Clone Windows 10 to SSD with GParted bootable USB You can refer to the tutorial of Tuxboot installation. exe file, and directly select a GParted distribution to download. Now, please install the official Tuxboot on your Windows PC. Or please create a partition of at least 300 MB and format it with the FAT16 or FAT32 file system. It should be formatted to FAT file system with at least 300 MB of space. There are 2 parts in this section, first, we need to create a GParted Live bootable USB, then we can use it to clone Windows 10 to SSD. Here, we’ll use GParted to clone Windows 10 from HDD to SSD as an example. Some users want to use GParted to clone Windows 10 to SSD but don’t know how to do it because the operation is a little complex. It's a great open-sourced program to reach most needs of daily use and essential computer management. GParted is perfectly compatible with x86 and x86-64-based computers with Linux, Windows, or Mac OSX operating systems by booting from media containing GParted Live. And it can mirror one partition with another. It can create/delete/resize/move/check/copy disk partitions and file systems, therefore, it is a quite useful tool to create space for a new OS, reorganize disk usage, and copy data residing on hard disks. GParted (GNOME Partition Editor) is a GTK front-end to GNU Parted and an official GNOME partition-editing application. ![]() Clone Windows 10 to SSD via a GParted Windows alternative.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |